Frigo

Özellikler

TECHNICAL SPECIFICATIONS OF REFRIGERATED BOX

DIMENSION :
WIDTH LENGTH HEIGHT
External : 2600 mm 6500 mm 2600 mm
Internal : 2460 mm 6350 mm 2430 mm
Volume : 44 cubic meters

Also available in all dimensions.

REFRIGERATED BOX SUB-ASSEMBLY PROPERTIES:

MAIN CHASSIS:
I cross-section profile made of high strength steel
A highly durable, extra strong, flexible product which is resistant to bad and rough road conditions and does not get broken or cracked

ELECTRICAL SYSTEM: 24 volt, complying with EEC standards, removable, set system.

PAINT : Chasis surfaces hardened and cleaned, then applied 2 layers of epoxy primer paint with automatic band system and then 2 layers of topcoat finish applied at desired RAL code.

REFRIGERATED BOX TECHNICAL SPECIFICATIONS:

PANEL MEASURES:

BOTTOM : GRP + HD POLYSTYRENE + PLYWOOD + GRP (NON-SKID)= 102 mm
SIDE WALLS : GRP + RTM POLYSTYRENE + PLYWOOD + GRP = 67 mm
CEILING : GRP + RTM POLYSTYRENE + GRP (WOVEN) = 67 mm
FRONT WALL : GRP + PLYWOOD + RTM POLYSTYRENE + PLYWOOD + GRP = 67 mm
DOORS : GRP + RTM POLYSTYRENE + PLYWOOD + GRP = 67 mm
REAR DOOR : There is a double wing door with locking mechanism with single handle opened for 270 degrees.
It has 3 stainless steel hinges, with a pipe of 27 mm gauge and a door rubber weather strip for air, dust and water tightness. Locking system is available for use of padlock.

DOOR RIM : 2 mm thick, with special machine folded, 304/A1 quality, made of stainless metal sheet.

PROTECTION BAR : There is one row of protection bar made of rolled aluminum on the right and left walls of the box In order to prevent damage to the internal surface by palettes.

EXTERNAL CORNERS: The bottom, top and front corners of the side walls are made of 3 mm thick special rolled aluminum profiles or special rolled CTP profiles.

BOX CONNECTION : The box is connected to the chassis with 6 x 2 chassis brackets.

TECHNICAL SPECIFICATIONS OF SIDE WALLS:

EXTERNAL SURFACE: Made of GRP
PLYWOOD: 4 mm plywood made of birch mounted randomly in order to promote wall strength.
INSULATION: RTM polystyrene with high heat insulation properties
INTERNAL SURFACE: GRP made of woven fiber with high strength.